Frigidaire · Air conditioners
Frigidaire air conditioner P1: The bottom water tray is full
THE SHORT ANSWER
The bottom water tray is full.
Frigidaire identifies P1 with this condition: The bottom water tray is full.
Check your portable unit’s drain instructions before moving it.
Keep the plug and outlet dry. Do not lift a heavy unit alone.
WHAT YOU MAY NOTICE
Symptoms to record
- P1 appears on the appliance display.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
With the unit unplugged, move it safely to a suitable drain location and remove the bottom drain plug as the manual directs.
What to noteCollected water drains away.
Replace the drain plug correctly. The support page permits a power reset of up to 30 seconds.
What to noteA recurring full-tray warning needs support.
THE DETAILS MATTER
Scope & troubleshooting notes
Seasonal startup
Stored water may trigger this message when the unit is first used for the season.
YOUR NEXT DECISION
When to stop and get help
Arrange service if P1 persists or returns after the documented owner check.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Room Air Conditioners - Error Code P1
Frigidaire · Manufacturer support · Checked
Code-specific explanation and owner troubleshooting — Frigidaire room/portable air conditioners with the bottom-tray P1 display described in the source.