GE Appliances · Air conditioners
GE Air Conditioner FL: ClearView Indoor Water Pan Full
THE SHORT ANSWER
The ClearView indoor collection pan needs draining.
On GE ClearView units, FL means excess water has collected on the indoor side. Drain it and clean the drain-pump filter using the model instructions.
Confirm the unit is a ClearView saddle-style air conditioner.
Keep water away from power connections and do not loosen the window installation.
WHAT YOU MAY NOTICE
Symptoms to record
- The display shows FL.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Follow ClearView's indoor-side drainage instructions; address the outdoor side if directed.
What to noteCollected water is removed in the intended way.
Clean the pump filter. If FL continues, GE permits a 30-second reset and recommends service for recurrence.
What to noteA continuing pump issue is escalated.
THE DETAILS MATTER
Scope & troubleshooting notes
How to use this guidance
High humidity and a stopped pump can both lead to this message. Do not tip an installed window unit or apply a portable-air-conditioner drainage method without checking the manual.
YOUR NEXT DECISION
When to stop and get help
If the message persists after the documented owner checks, contact GE support with the complete display and model number.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- ClearView Air Conditioner - FL on the Display
GE Appliances · Manufacturer support · Checked
Meaning and owner guidance — GE ClearView saddle-style window air conditioners only.