KitchenAid · Cooktops
KitchenAid cooktop F0: Something is pressing on the touch-control area
THE SHORT ANSWER
Something is pressing on the touch-control area.
KitchenAid identifies F0 with this condition: Something is pressing on the touch-control area.
Turn the controls off and check for a utensil, liquid or residue on the panel.
Allow hot surfaces to cool before cleaning. Do not remove the glass or control housing.
WHAT YOU MAY NOTICE
Symptoms to record
- F0 appears on the appliance display.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Remove objects and clean residue once the surface is cool.
What to noteThe touch controls are no longer held down.
Switch the circuit breaker off for one minute, restore it, and observe the cooktop for one minute.
What to notePersistent F0 needs service.
YOUR NEXT DECISION
When to stop and get help
Arrange service if F0 persists or returns after the documented owner check.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- F0 or F00 - Electric and Induction Cooktop
KitchenAid · Manufacturer support · Checked
Code-specific explanation and owner troubleshooting — KitchenAid cooktop families covered by the cited manufacturer support pages; confirm the complete model before applying guidance.