ERROR CODEF36Diagnostic reference

Whirlpool · Cooktops

Whirlpool Cooktop F36 / F37: Induction Coil Temperature Sensor

THE SHORT ANSWER

A temperature sensor on an induction coil may have a problem.

F36: A temperature sensor on an induction coil may have a problem. Whirlpool publishes the same owner guidance for F37; both displays are covered here.

First safe check

Record the complete F36 display before resetting the cooktop.

Applies to

Whirlpool electric or induction cooktops covered by the cited support article.

Codes covered by this guide
F36F37
Before you start

Let the surface cool. Do not lift the cooktop or access internal wiring.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

  • The display reports F36.

UNDERSTAND THE POSSIBILITIES

Causes & useful observations

A code identifies a condition. It does not, by itself, confirm which part needs repair.

Possible causes, observable symptoms, safe checks, and service boundaries
Possible causeWhat to look forSafe check / next step
Induction Coil Temperature SensorService may be neededA sensor indication does not establish that the glass surface or induction coil needs replacement.Have a qualified technician diagnose the reported system; the display does not identify a replacement part.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 2 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

  1. If the appliance and its surroundings are dry and undamaged, disconnect power at the appropriate breaker for one minute, then restore it.

    What to note

    Observe whether the code returns.

  2. Give the service provider F36, the model number, and when the message appeared.

    What to note

    The reported system can be diagnosed for this model.

THE DETAILS MATTER

Scope & troubleshooting notes

Before choosing instructions

Match the appliance family and complete display to the source; an identical code on another appliance can mean something different.

YOUR NEXT DECISION

When to stop and get help

Request service if F36 remains or returns after the supported checks.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

Whirlpool support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

  1. F36, F37 - Electric and Induction Cooktop

    Whirlpool · Manufacturer support · Checked

    Code meaning and Possible Solutions — Whirlpool electric or induction cooktops covered by the cited support article.

ErrHive is an independent information resource, not an authorized representative of Whirlpool. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.