Amana · Dishwashers
Amana Dishwasher F8E4: Drip-tray or leak-protection alert
THE SHORT ANSWER
Drip-tray or leak-protection alert.
Amana dishwasher F8E4 indicates drip-tray or leak-protection alert. A leak, suds or a float-switch installation issue can trigger protective draining.
Shut off the dishwasher water supply if it is safely accessible.
Do not use a routine unplug/reset for this alert. Avoid wet electrical areas; do not reach under a powered dishwasher.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Press Cancel once to silence the alarm, keep the door closed and leave power on, as the installed-unit guidance requires.
What to noteThe drain sequence can continue.
Have the installer or service inspect the tray, water connections and float connection. Do not repeatedly empty the tray and restart.
What to noteThe underlying leak or installation issue must be corrected.
YOUR NEXT DECISION
When to stop and get help
Seek service when water is visible, the alert persists, or access requires removing panels.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- F8E4 - Dishwasher
Amana · Manufacturer support · Checked
Code meaning and owner troubleshooting — Amana dishwashers using the cited F/E code family.