ERROR CODEE25Diagnostic reference

Bosch · Dishwashers

Bosch Dishwasher E25: Pump Cover and Obstruction Checks

THE SHORT ANSWER

The drain pump is obstructed, or its cover is loose or missing.

Bosch’s E25 page identifies an obstructed drain pump or a loose or missing pump cover. The cover is beneath the filter on the designs described in the source.

First safe check

Check the model manual before attempting any pump-cover access.

Applies to

General US support guidance; confirm the exact model manual before applying instructions.

Before you start

Disconnect power before permitted pump-area maintenance; let water cool and watch for sharp debris. Never run the appliance with a cover missing.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

  • E25 is displayed.
  • The pump cover may be visibly out of position when accessed as instructed.

UNDERSTAND THE POSSIBILITIES

Causes & useful observations

A code identifies a condition. It does not, by itself, confirm which part needs repair.

Possible causes, observable symptoms, safe checks, and service boundaries
Possible causeWhat to look forSafe check / next step
Loose or missing pump coverThe cover is not seated as the manual shows.Check the manual’s fitting instructions.
Obstruction near the drain pumpDebris may be present beneath the filter area.Only perform maintenance expressly allowed in your manual.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 3 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

  1. Switch off and disconnect power before any manual-approved pump-area check.

    What to note

    The appliance cannot start during maintenance.

  2. Use the exact manual’s access and refitting steps; designs and release mechanisms vary.

    What to note

    A complete cover is secured in place.

  3. Do not reach blindly or force parts. Ask Bosch for help if safe owner maintenance does not resolve the issue.

    What to note

    A persistent problem receives service attention.

THE DETAILS MATTER

Scope & troubleshooting notes

No universal removal technique

Although Bosch illustrates a cover-removal technique, ErrHive defers to the exact model manual so an unfamiliar cover is not forced or damaged.

YOUR NEXT DECISION

When to stop and get help

Stop if the cover is damaged, cannot seat correctly, or safe removal of debris is not possible.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

Bosch support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

  1. Bosch Dishwasher E25 Troubleshooting

    Bosch Home Appliances · Manufacturer support · Checked

    Bosch Dishwasher E25 Troubleshooting — Bosch US dishwasher support; exact model applicability is not established by this general article.

  2. Bosch Dishwasher Error Codes

    Bosch Home Appliances · Manufacturer support · Checked

    Individual E14–E25 entries — Bosch US dishwasher code directory; codes vary by appliance generation.

    The E24 article contains an inlet-hose reference despite discussing drain faults. ErrHive does not silently reinterpret this as a model-specific instruction.

ErrHive is an independent information resource, not an authorized representative of Bosch. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.