Frigidaire · Dishwashers
Frigidaire dishwasher CL: The dishwasher door is not fully closed and latched
THE SHORT ANSWER
The dishwasher door is not fully closed and latched.
Frigidaire identifies CL with this condition: The dishwasher door is not fully closed and latched.
Check that racks and dishes are not preventing normal door closure.
Do not force the door or bypass its switch.
WHAT YOU MAY NOTICE
Symptoms to record
- CL appears on the appliance display.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Remove visible obstructions and close the door until it latches without force.
What to noteThe door-closure message turns off.
If the door cannot latch or CL remains with it closed, request service.
What to noteThe latch is checked without bypassing it.
YOUR NEXT DECISION
When to stop and get help
Arrange service if CL persists or returns after the documented owner check.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Dishwasher Error Code CL or Cd - Door is open
Frigidaire · Manufacturer support · Checked
Code-specific explanation and owner troubleshooting — Frigidaire dishwasher families covered by the cited manufacturer support pages; confirm the complete model before applying guidance.