errhive.APPLIANCE INTELLIGENCEFind a code
ERROR CODE1H / 2H / number + HDiagnostic reference

GE Appliances · Dishwashers

GE Dishwasher 1H / 2H / number + H: Delay Start Is Selected

Documentation checkedBy ErrHiveUpdated

THE SHORT ANSWER

The display shows hours until the wash starts.

A number followed by H on supported GE dishwashers indicates Delay Start. The number counts down until the programmed wash begins.

First safe check

Check whether Delay Start was selected accidentally.

Applies to

GE Appliances US consumer support; codes and controls vary by product family and model.

Before you start

Keep checks outside service panels. Stop if there is leaking water, unusual heat, a burning smell or damaged wiring.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

  • The display shows 1H / 2H / number + H.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 2 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

  1. Match the display to the Delay Start section in the model manual.

    What to note

    The scheduled wait is identified.

  2. If you want an immediate wash, cancel the delay using the manual; opening the door alone does not cancel it.

    What to note

    The intended start time is selected.

THE DETAILS MATTER

Scope & troubleshooting notes

How to use this guidance

Do not treat each hour value as a different fault. These displays share one function and belong on a single guide.

YOUR NEXT DECISION

When to stop and get help

If the message persists after the documented owner checks, contact GE support with the complete display and model number.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

GE Appliances support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

  1. Dishwasher - Delay Start Option

    GE Appliances · Manufacturer support · Checked

    Meaning and owner guidance — GE Appliances US consumer support; codes and controls vary by product family and model.

ErrHive is an independent information resource, not an authorized representative of GE Appliances. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.