ERROR CODELEAK DETECTEDDiagnostic reference

GE Appliances · Dishwashers

GE Dishwasher LEAK DETECTED: Stop and Arrange Service

THE SHORT ANSWER

The Floor Protect with Alert moisture sensor has detected moisture.

On GE models equipped with Floor Protect with Alert, a moisture sensor below the appliance can trigger LEAK DETECTED. The dishwasher cancels the cycle and pumps remaining tub water out.

First safe check

Stop trying to run new cycles and record the message.

Applies to

GE dishwashers equipped with Floor Protect with Alert; not a claim about every GE model.

Before you start

Avoid wet electrical connections. Do not remove the base pan or defeat the moisture sensor.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

  • LEAK DETECTED is displayed.
  • The cycle is cancelled and draining may occur.

UNDERSTAND THE POSSIBILITIES

Causes & useful observations

A code identifies a condition. It does not, by itself, confirm which part needs repair.

Possible causes, observable symptoms, safe checks, and service boundaries
Possible causeWhat to look forSafe check / next step
Moisture detected under the applianceService may be neededThe alert appears, with or without visible water outside.Observe safely and arrange service; do not dismantle the base.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 3 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

  1. Photograph the message and note any visible water from a safe position.

    What to note

    A clear report for the technician.

  2. GE says to disconnect power if the dishwasher is also beeping with this message. Use a dry, safely accessible disconnection point.

    What to note

    The appliance remains out of use until repair.

  3. Use GE’s official support route and provide the model number.

    What to note

    The moisture source can be investigated.

THE DETAILS MATTER

Scope & troubleshooting notes

Floor Protect is not always the same feature

GE distinguishes a collection pan called Floor Protect from Floor Protect with Alert, which includes a moisture sensor. Confirm the feature in the model documentation.

YOUR NEXT DECISION

When to stop and get help

GE calls for service for this message or leakage from underneath the dishwasher.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

GE Appliances support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

  1. Dishwasher - Floor Protect / Leak Protection Feature

    GE Appliances · Manufacturer support · Checked

    Dishwasher - Floor Protect / Leak Protection Feature — GE dishwashers equipped with Floor Protect or Floor Protect with Alert.

ErrHive is an independent information resource, not an authorized representative of GE Appliances. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.