KitchenAid · Dishwashers
KitchenAid Dishwasher F7E2: Wash Motor Alert and Service Limit
THE SHORT ANSWER
The control reports a wash motor error.
F7E2 reports a wash motor error. KitchenAid allows a power cycle, then directs owners to service if the code returns.
Record the code before clearing it.
Keep panels closed. Motor and wiring diagnosis are professional work.
WHAT YOU MAY NOTICE
Symptoms to record
- F7E2 appears on the dishwasher display.
UNDERSTAND THE POSSIBILITIES
Causes & useful observations
A code identifies a condition. It does not, by itself, confirm which part needs repair.
| Possible cause | What to look for | Safe check / next step |
|---|---|---|
| Wash motor fault indicationService may be needed | The control reports F7E2. | Try only the documented external power cycle. |
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Note the code and the point in the cycle when it appeared.
What to noteThe service history is retained.
Disconnect at a safely accessible dry plug for 30 seconds, or turn off the dishwasher breaker for 30 seconds, then restore power.
What to noteThe control restarts.
Stop here if: Do not access wiring.If the code returns, schedule service.
What to noteA qualified technician investigates the cause.
THE DETAILS MATTER
Scope & troubleshooting notes
An alert is not a parts order
The code alone does not justify buying a replacement motor.
YOUR NEXT DECISION
When to stop and get help
If F7E2 returns after the documented power cycle, schedule service.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- F7E2 - Dishwasher
KitchenAid · Manufacturer support · Checked
Wash motor error; 30-second power cycle; service — Applicable KitchenAid dishwashers