ERROR CODEF6E1Diagnostic reference

Maytag · Dishwashers

Maytag Dishwasher F6E1: User-interface or main-control concern

THE SHORT ANSWER

User-interface or main-control concern.

Maytag dishwasher F6E1 indicates user-interface or main-control concern. The published owner guidance identifies the control interface as the area to investigate.

First safe check

Save the exact F6E1 message before any restart.

Applies to

Maytag dishwashers using the cited F/E code family; confirm the model manual.

Before you start

Do not remove electrical covers or reach beneath a powered dishwasher. Stop if an active leak is present.

Go to safe checks

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 2 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

  1. Turn off dishwasher power for 30 seconds, then turn it back on.

    What to note

    Watch for a returning control message.

  2. If F6E1 persists, contact service with the model number.

    What to note

    Avoid replacing a console or board from this code alone.

YOUR NEXT DECISION

When to stop and get help

Contact Maytag service if F6E1 returns after the applicable owner checks.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

Maytag support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

  1. F6E1 - Dishwasher

    Maytag · Manufacturer support · Checked

    Code meaning and owner troubleshooting — Maytag dishwashers using the cited F/E code family.

ErrHive is an independent information resource, not an authorized representative of Maytag. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.