Maytag · Dishwashers
Maytag Dishwasher F8E5: Inlet valve possibly stuck open
THE SHORT ANSWER
Inlet valve possibly stuck open.
Maytag dishwasher F8E5 indicates inlet valve possibly stuck open. The priority is controlling incoming water while retaining protective draining when possible.
Locate the dishwasher water shutoff without entering a wet electrical area.
Keep the door closed. Do not disconnect power as the first action when you can shut off water safely.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Close the water supply if possible. Press Cancel once, then close the door and keep power on.
What to noteThe dishwasher can continue its protective response.
If the water supply cannot be shut off, the manufacturer says to turn dishwasher power off. Arrange service.
What to noteThe stuck-open condition requires repair.
YOUR NEXT DECISION
When to stop and get help
Do not resume a wash cycle until the inlet-valve problem has been addressed.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- F8E5 - Dishwasher
Maytag · Manufacturer support · Checked
Code meaning and owner troubleshooting — Maytag dishwashers using the cited F/E code family.