Maytag · Dishwashers
Maytag Dishwasher F9E1: Long drain
THE SHORT ANSWER
Long drain.
Maytag dishwasher F9E1 indicates long drain. Water is not leaving within the expected time. Start with the accessible drain route.
Inspect the visible hose between the dishwasher and sink for pinching.
Do not remove electrical covers or reach beneath a powered dishwasher. Stop if an active leak is present.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Clean the removable filter as the manual permits. Check the sink drain, disposer and air gap for blockage.
What to noteWater has an unobstructed exit.
Ask the installer to verify the disposer knockout and hose routing. If drainage remains poor, schedule service.
What to noteInstallation problems are ruled out before pump replacement.
THE DETAILS MATTER
Scope & troubleshooting notes
Important distinction
A long-drain message does not identify a failed drain pump by itself.
YOUR NEXT DECISION
When to stop and get help
Contact Maytag service if F9E1 returns after the applicable owner checks.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- F9E1 - Dishwasher
Maytag · Manufacturer support · Checked
Code meaning and owner troubleshooting — Maytag dishwashers using the cited F/E code family.