Miele · Dishwashers
Miele dishwasher F600: AutoDos dispensing outlet blocked
THE SHORT ANSWER
AutoDos dispensing outlet blocked
Miele F600 indicates an AutoDos blockage that cancels washing, starts draining and can prevent restarting.
Turn off before cleaning the lower spray arm or AutoDos.
Keep moisture out of AutoDos internals and dry all cleaned parts before reassembly.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Follow the illustrated arm-cleaning procedure. Rinse debris out, refit with the filter flat and the arm locked, and verify free rotation.
What to noteUnobstructed lower arm.
Remove the PowerDisk and follow the correct AutoDos 1.0 or 2.0 instructions. Their holder-release methods differ; 1.0 also has a removable fill channel.
What to noteThe appropriate illustrated cleaning sequence is followed.
Dry parts thoroughly. Align the holder arrows, seat the holder flat and a full PowerDisk flush, clean the seals and lock the lid tightly.
What to noteDispenser dry and closed.
YOUR NEXT DECISION
When to stop and get help
Contact Miele if F600 persists after the documented cleaning.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Fault F600 (AutoDos: dispensing process outlet fault)
Miele USA · Manufacturer support · Checked
Fault explanation and owner response — Miele AutoDos 1.0/2.0 dishwashers. Match the installed version.