ERROR CODEF1E1

Whirlpool · Dishwashers

Whirlpool Dishwasher F1E1: Control Module Alert

Documentation checkedBy ErrHiveUpdated October 28, 2026

THE SHORT ANSWER

Whirlpool identifies a possible control-module problem.

F1E1: Whirlpool identifies a possible control-module problem.

First safe check

Record the complete F1E1 display before resetting the dishwasher.

Applies to

Whirlpool dishwashers covered by the cited support article; meanings can differ on older platforms.

Before you start

Do not touch wet electrical connections or remove control, pump, or heater panels.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

The display reports F1E1.

UNDERSTAND THE POSSIBILITIES

Causes & useful observations

A code identifies a condition. It does not, by itself, confirm which part needs repair.

Possible causes, observable symptoms, safe checks, and service boundaries
Possible cause	What to look for	Safe check / next step
Control Module AlertService may be needed	A displayed F1E1 calls for a control reset, followed by service if it recurs.	Have a qualified technician diagnose the reported system; the display does not identify a replacement part.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 2 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

Try the documented power cycle
If the appliance and its surroundings are dry and undamaged, disconnect power at the appropriate breaker for 30 seconds, then restore it.
What to note
Observe whether the code returns.
Escalate a repeated alert
Give the service provider F1E1, the model number, and when the message appeared.
What to note
The reported system can be diagnosed for this model.

THE DETAILS MATTER

Scope & troubleshooting notes

Before choosing instructions

Match the appliance family and complete display to the source; an identical code on another appliance can mean something different.

YOUR NEXT DECISION

When to stop and get help

Request service if F1E1 remains or returns after the supported checks.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

Whirlpool support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

F1E1 - Dishwasher
Whirlpool · Manufacturer support · Checked Oct 28, 2026
Code meaning and Possible Solutions — Whirlpool dishwashers covered by the cited support article; meanings can differ on older platforms.

ErrHive is an independent information resource, not an authorized representative of Whirlpool. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.