GE Appliances · Dryers
GE Dryer 1 / 2: Dryer Personality Setting
THE SHORT ANSWER
A dryer configuration setting may be awaiting selection.
Some 2019-and-newer GE dryers show 1 or 2 when their personality setting needs selection. GE specifies 1 for electric and 2 for gas; Start toggles the choices.
Confirm the dryer's fuel type and that your model uses this setup step.
No power-terminal, gas or wiring work is part of selecting this setting.
WHAT YOU MAY NOTICE
Symptoms to record
- The display shows 1 / 2.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Use the owner instructions for the actual dryer.
What to noteAn ordinary time display is not confused with setup.
Use Start to choose the correct value where this procedure applies.
What to noteThe model has its intended configuration.
THE DETAILS MATTER
Scope & troubleshooting notes
How to use this guidance
Do not guess the fuel type from the display. If configuration is uncertain or the dryer still will not start, contact GE rather than entering unrelated service menus.
YOUR NEXT DECISION
When to stop and get help
If the message persists after the documented owner checks, contact GE support with the complete display and model number.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Dryer - Will Not Run or Start
GE Appliances · Manufacturer support · Checked
Meaning and owner guidance — Selected 2019-and-newer GE dryers requiring a personality setting.