ERROR CODEF3 E2Diagnostic reference

Whirlpool · Dryers

Whirlpool Dryer F3 E2 / F3 E5: Moisture Sensor Data Missing

THE SHORT ANSWER

Five consecutive loads ran without registered moisture-sensor data.

F3 E2: Five consecutive loads ran without registered moisture-sensor data. Whirlpool publishes the same owner guidance for F3 E5; both displays are covered here.

First safe check

Check whether only tiny loads or single garments were being dried.

Applies to

Whirlpool dryers covered by the cited support article.

Codes covered by this guide
F3 E2F3 E5
Before you start

Do not open the cabinet, test live wiring, or disturb gas connections.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

  • The display reports F3 E2.

UNDERSTAND THE POSSIBILITIES

Causes & useful observations

A code identifies a condition. It does not, by itself, confirm which part needs repair.

Possible causes, observable symptoms, safe checks, and service boundaries
Possible causeWhat to look forSafe check / next step
Moisture Sensor Data MissingPoor leveling or limited garment contact can explain missing readings without proving sensor failure.Check whether only tiny loads or single garments were being dried.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 2 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

  1. A very small load may not touch the sensors. Use an appropriate load and the manual’s cycle guidance.

    What to note

    Clothing can contact the sensing area.

  2. Use a suitable straight cabinet edge, not a curved top, to check level. Press Power to clear the alert.

    What to note

    Contact improves; repeated errors go to service.

THE DETAILS MATTER

Scope & troubleshooting notes

Before choosing instructions

Match the appliance family and complete display to the source; an identical code on another appliance can mean something different.

YOUR NEXT DECISION

When to stop and get help

Request service if F3 E2 remains or returns after the supported checks.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

Whirlpool support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

  1. F3 E2 - Error Code - Dryer

    Whirlpool · Manufacturer support · Checked

    Code meaning and Possible Solutions — Whirlpool dryers covered by the cited support article.

  2. F3 E5 - Error Code - Dryer

    Whirlpool · Manufacturer support · Checked

    Code meaning and Possible Solutions — Whirlpool dryers covered by the cited support article.

ErrHive is an independent information resource, not an authorized representative of Whirlpool. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.