GE Microwave PF / 888 / 8888: Power Was Interrupted

Documentation checkedBy ErrHiveUpdated October 28, 2026

THE SHORT ANSWER

Power has just been connected or restored.

GE microwaves can show PF, 888 or 8888 after installation, unplugging or a power interruption. Use Clear or Clear/Off, then reset the clock if fitted.

First safe check

Check whether the message began when power was restored.

Applies to

GE Appliances US consumer support; codes and controls vary by product family and model.

Before you start

Do not remove microwave covers or touch internal components, even with the power disconnected.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

The display shows PF / 888 / 8888.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 2 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

Acknowledge the display
Press the model's Clear or Clear/Off control.
What to note
The startup message should disappear.
Set the clock
Follow the clock-setting instructions for your control panel.
What to note
The normal time display is restored.

THE DETAILS MATTER

Scope & troubleshooting notes

How to use this guidance

A startup display alone does not diagnose a failed microwave. If power interruptions recur without an explanation, record the pattern and seek support rather than repeatedly clearing the message.

YOUR NEXT DECISION

When to stop and get help

If the message persists after the documented owner checks, contact GE support with the complete display and model number.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

GE Appliances support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

Microwave - Power Failure (PF) Code
GE Appliances · Manufacturer support · Checked Oct 28, 2026
Meaning and owner guidance — GE Appliances US consumer support; codes and controls vary by product family and model.

ErrHive is an independent information resource, not an authorized representative of GE Appliances. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.