ERROR CODEF6Diagnostic reference

Whirlpool · Microwaves

Whirlpool Microwave F6: Function Could Not Execute

THE SHORT ANSWER

The requested function could not run; the relay control board or wiring may be involved.

F6: The requested function could not run; the relay control board or wiring may be involved.

First safe check

Record the complete F6 display before resetting the microwave.

Applies to

Whirlpool over-the-range microwaves covered by the cited support article.

Before you start

Never remove the microwave cover or bypass door interlocks; internal parts require qualified service even after unplugging.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

  • The display reports F6.

UNDERSTAND THE POSSIBILITIES

Causes & useful observations

A code identifies a condition. It does not, by itself, confirm which part needs repair.

Possible causes, observable symptoms, safe checks, and service boundaries
Possible causeWhat to look forSafe check / next step
Function Could Not ExecuteService may be neededA relay-control fault is not an instruction to open the microwave or replace a fuse.Have a qualified technician diagnose the reported system; the display does not identify a replacement part.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 2 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

  1. If the appliance and its surroundings are dry and undamaged, disconnect power at the appropriate breaker for one minute, then restore it.

    What to note

    Observe whether the code returns.

  2. Give the service provider F6, the model number, and when the message appeared.

    What to note

    The reported system can be diagnosed for this model.

THE DETAILS MATTER

Scope & troubleshooting notes

Before choosing instructions

Match the appliance family and complete display to the source; an identical code on another appliance can mean something different.

YOUR NEXT DECISION

When to stop and get help

Request service if F6 remains or returns after the supported checks.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

Whirlpool support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

  1. F6 - Error Code - Over-the-Range Microwave

    Whirlpool · Manufacturer support · Checked

    Code meaning and Possible Solutions — Whirlpool over-the-range microwaves covered by the cited support article.

ErrHive is an independent information resource, not an authorized representative of Whirlpool. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.