GE Appliances · Other appliances
GE Dehumidifier E01 / P1: Dehumidifier Pump-Out Problem
THE SHORT ANSWER
The built-in pump is not removing water as expected.
Pump-equipped GE dehumidifiers use E01 on 70-pint models and P1 on 50-pint models.
Confirm a built-in pump and selected pump mode.
Do not open the pump motor or refrigeration circuit.
WHAT YOU MAY NOTICE
Symptoms to record
- Display: E01 / P1.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Verify the pump hose is properly connected and the bucket sits securely.
What to noteTwo documented setup causes are checked.
Unplug for 30 seconds and reconnect; consult the model warranty if the code returns.
What to noteA persistent pump issue goes to support.
THE DETAILS MATTER
Scope & troubleshooting notes
Owner observations
Photograph the display; consult warranty options for unresolved faults.
YOUR NEXT DECISION
When to stop and get help
Contact support if the fault persists.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Dehumidifier - Fault or Error Codes
GE Appliances · Manufacturer support · Checked
Meaning and owner guidance — GE dehumidifiers; pump-out messages apply to models with a built-in pump.