Whirlpool · Ovens & ranges
Whirlpool Oven PUSH / PSH: Press Start Reminder
THE SHORT ANSWER
A cooking function was selected without pressing Start.
PUSH / PSH: A cooking function was selected without pressing Start.
Check that the chosen settings are correct before starting.
Let hot surfaces cool. Do not bypass the door lock, open electrical panels, or disturb gas connections.
WHAT YOU MAY NOTICE
Symptoms to record
- The display reports PUSH / PSH.
UNDERSTAND THE POSSIBILITIES
Causes & useful observations
A code identifies a condition. It does not, by itself, confirm which part needs repair.
| Possible cause | What to look for | Safe check / next step |
|---|---|---|
| Press Start Reminder | Whirlpool says the prompt can appear after five seconds without Start. | Check that the chosen settings are correct before starting. |
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Press Start to begin the intended cooking function.
What to noteThe reminder clears.
On the cited control, an unconfirmed selection cancels after one minute. Enter it again if needed.
What to noteThe intended function, not an expired selection, starts.
THE DETAILS MATTER
Scope & troubleshooting notes
Before choosing instructions
Match the appliance family and complete display to the source; an identical code on another appliance can mean something different.
YOUR NEXT DECISION
When to stop and get help
Request service if PUSH / PSH remains or returns after the supported checks.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- PUSH or PSH - Range
Whirlpool · Manufacturer support · Checked
Code meaning and Possible Solutions — Whirlpool ranges covered by the cited support article.