GE Appliances · Washing machines
GE Washer 18: UltraFast Combo Drain Filter
THE SHORT ANSWER
The Combo drain path needs checking.
UltraFast Combo code 18 calls for pump-filter and drain-hose-placement checks.
Use the Combo's pump-filter section before opening any drain cover.
Allow hot water to cool and contain residual water. Do not open a filter while the appliance runs.
WHAT YOU MAY NOTICE
Symptoms to record
- Display: 18.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Use the model manual's pump-filter procedure.
What to noteWater is contained before filter removal.
Compare insertion depth with the installation instructions.
What to noteIncorrect hose placement can be identified.
THE DETAILS MATTER
Scope & troubleshooting notes
Owner observations
Record unusually wet loads or longer drying with this code.
YOUR NEXT DECISION
When to stop and get help
Contact support if the fault persists.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
GE Appliances · Manufacturer support · Checked
Meaning and owner guidance — GE Profile UltraFast Combo washer/dryers only, not standalone GE washers or vented dryers.