ERROR CODEOFbDiagnostic reference

Maytag · Washing machines

Maytag Washer OFb: Redistribute an Off-Balance Load

THE SHORT ANSWER

The load is off balance and needs redistribution.

OFb indicates that automatic balancing could not correct the load. Manual redistribution is needed.

First safe check

Check whether the cycle can be paused normally.

Applies to

Maytag top-load washers covered by the OFb support guidance.

Before you start

Wait until the basket stops and the lid unlocks before reaching inside.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

  • Off-balance alert interrupts washing or spinning.

UNDERSTAND THE POSSIBILITIES

Causes & useful observations

A code identifies a condition. It does not, by itself, confirm which part needs repair.

Possible causes, observable symptoms, safe checks, and service boundaries
Possible causeWhat to look forSafe check / next step
Uneven loadClothing is concentrated on one side.Redistribute around the washplate.
Excess loadBasket is overfilled.Remove some items.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 3 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

  1. Press Start to pause; after normal unlocking, rearrange clothing or reduce the load.

    What to note

    The load is distributed evenly.

  2. Cancel using the documented control; use a drain-only cycle if water remains.

    What to note

    The washer drains before a new cycle.

  3. Restart washing, or use Drain & Spin when washing is already complete.

    What to note

    Observe whether the corrected load spins normally.

THE DETAILS MATTER

Scope & troubleshooting notes

Follow your control guide

Cycle names and button behavior must match your exact washer. This is not a service-mode procedure.

YOUR NEXT DECISION

When to stop and get help

If balanced loads repeatedly trigger OFb, contact service.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

Maytag support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

  1. OFb or ofb - Error Code

    Maytag · Manufacturer support · Checked

    Off-balance load; pause; redistribution; drain options — Applicable Maytag top-load washers

  2. Error Codes in Top Load HE Washers

    Maytag · Manufacturer support · Checked

    LdL, LdU, HC and OFb entries — Selected Maytag top-load HE washers

ErrHive is an independent information resource, not an authorized representative of Maytag. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.