ERROR CODEF6 E2

Whirlpool · Washing machines

Whirlpool Washer F6 E2: Washer Reboot Alert

Documentation checkedBy ErrHiveUpdated October 28, 2026

THE SHORT ANSWER

The appliance control, user interface, or their wiring has a reported problem.

F6 E2: The appliance control, user interface, or their wiring has a reported problem.

First safe check

Record the complete F6 E2 display before resetting the washer.

Applies to

Whirlpool top-load washers covered by the cited code page.

Before you start

Keep hands out of a moving drum. Never force the door or bypass a lock.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

The display reports F6 E2.

UNDERSTAND THE POSSIBILITIES

Causes & useful observations

A code identifies a condition. It does not, by itself, confirm which part needs repair.

Possible causes, observable symptoms, safe checks, and service boundaries
Possible cause	What to look for	Safe check / next step
Washer Reboot AlertService may be needed	Whirlpool calls this a reboot alert on the documented top-load family.	Have a qualified technician diagnose the reported system; the display does not identify a replacement part.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 2 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

Try the documented power cycle
If the appliance and its surroundings are dry and undamaged, disconnect power at the appropriate breaker for five minutes, then restore it.
What to note
Observe whether the code returns.
Escalate a repeated alert
Give the service provider F6 E2, the model number, and when the message appeared.
What to note
The reported system can be diagnosed for this model.

THE DETAILS MATTER

Scope & troubleshooting notes

Before choosing instructions

Match the appliance family and complete display to the source; an identical code on another appliance can mean something different.

YOUR NEXT DECISION

When to stop and get help

Request service if F6 E2 remains or returns after the supported checks.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

Whirlpool support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

F6E2 - Error Code
Whirlpool · Manufacturer support · Checked Oct 28, 2026
Code meaning and Possible Solutions — Whirlpool top-load washers covered by the cited code page.

ErrHive is an independent information resource, not an authorized representative of Whirlpool. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.