Whirlpool · Washing machines
Whirlpool Washer LoC: Control Lock Enabled
THE SHORT ANSWER
The washer controls are locked against unwanted input.
LoC: The washer controls are locked against unwanted input.
Locate the Control Lock label and its instructions for your model.
Keep hands out of a moving drum. Never force the door or bypass a lock.
WHAT YOU MAY NOTICE
Symptoms to record
- The display reports LoC.
UNDERSTAND THE POSSIBILITIES
Causes & useful observations
A code identifies a condition. It does not, by itself, confirm which part needs repair.
| Possible cause | What to look for | Safe check / next step |
|---|---|---|
| Control Lock Enabled | The source describes a control setting, not an electrical failure. | Locate the Control Lock label and its instructions for your model. |
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
On the documented panel, hold Control Lock for three seconds; confirm the button assignment in the manual.
What to noteThe lock indicator clears.
Select the intended cycle after unlocking.
What to noteButtons respond without LoC or LC.
THE DETAILS MATTER
Scope & troubleshooting notes
Before choosing instructions
Match the appliance family and complete display to the source; an identical code on another appliance can mean something different.
YOUR NEXT DECISION
When to stop and get help
Request service if LoC remains or returns after the supported checks.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- LoC or LC - Front Load Washer
Whirlpool · Manufacturer support · Checked
Code meaning and Possible Solutions — Whirlpool front-load washers covered by the cited support article.