Whirlpool · Washing machines
Whirlpool Washer OFb: Load Needs Rebalancing
THE SHORT ANSWER
The washer could not automatically correct an unbalanced load.
OFb: The washer could not automatically correct an unbalanced load.
Pause and wait for the basket to stop before opening the lid.
Keep hands out of a moving drum. Never force the door or bypass a lock.
WHAT YOU MAY NOTICE
Symptoms to record
- The display reports OFb.
UNDERSTAND THE POSSIBILITIES
Causes & useful observations
A code identifies a condition. It does not, by itself, confirm which part needs repair.
| Possible cause | What to look for | Safe check / next step |
|---|---|---|
| Load Needs Rebalancing | The alert calls for load correction after automatic balancing was insufficient. | Pause and wait for the basket to stop before opening the lid. |
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Arrange items evenly around the washplate and remove excess items.
What to noteThe load is balanced and loosely packed.
Restart once the lid is closed; use the appropriate manual-listed cycle for bulky items.
What to noteSpinning resumes without another imbalance message.
THE DETAILS MATTER
Scope & troubleshooting notes
Before choosing instructions
Match the appliance family and complete display to the source; an identical code on another appliance can mean something different.
YOUR NEXT DECISION
When to stop and get help
Request service if OFb remains or returns after the supported checks.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- OFb or ofb - Error Code
Whirlpool · Manufacturer support · Checked
Code meaning and Possible Solutions — Whirlpool top-load washers covered by the cited code page.