Amana · Dishwashers
Amana Dishwasher F1E1: Control-module concern
THE SHORT ANSWER
Control-module concern.
Amana dishwasher F1E1 indicates control-module concern. The control has reported a fault; this alone does not establish that a new board is needed.
Photograph the entire F1E1 display before clearing it.
Do not remove electrical covers or reach beneath a powered dishwasher. Stop if an active leak is present.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Disconnect power for 30 seconds using the accessible plug or the identified breaker, then restore it.
What to noteCheck whether F1E1 returns.
Give service the code and model number if the control reports it again.
What to noteInternal diagnosis belongs to service.
YOUR NEXT DECISION
When to stop and get help
Contact Amana service if F1E1 returns after the applicable owner checks.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- F1E1 - Dishwasher
Amana · Manufacturer support · Checked
Code meaning and owner troubleshooting — Amana dishwashers using the cited F/E code family.