Amana · Dishwashers
Amana Dishwasher F1E2 / F2E2: Main-control communication error
THE SHORT ANSWER
Main-control communication error.
Amana dishwasher F1E2 / F2E2 indicates main-control communication error. Both messages are grouped here because the manufacturer gives the same communication guidance.
Record whether the display says F1E2 or F2E2.
F1E2F2E2Do not remove electrical covers or reach beneath a powered dishwasher. Stop if an active leak is present.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Switch the dishwasher supply off for 30 seconds, then restore power.
What to noteThe communication message should clear.
If the same code returns, arrange service rather than ordering a control from the code alone.
What to noteA technician can identify the affected connection or component.
THE DETAILS MATTER
Scope & troubleshooting notes
Applies to the documented family
Use the cited Amana guidance with your model manual. The same display on another appliance can mean something different.
YOUR NEXT DECISION
When to stop and get help
Contact Amana service if F1E2 / F2E2 returns after the applicable owner checks.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- F1E2- Dishwasher
Amana · Manufacturer support · Checked
Code meaning and owner troubleshooting — Amana dishwashers using the cited F/E code family.
- F2E2- Dishwasher
Amana · Manufacturer support · Checked
Code meaning and owner troubleshooting — Amana dishwashers using the cited F/E code family.