Frigidaire · Dishwashers
Frigidaire dishwasher i20: The dishwasher has not drained properly
THE SHORT ANSWER
The dishwasher has not drained properly.
Frigidaire identifies i20 with this condition: The dishwasher has not drained properly.
Inspect the accessible hose for a restriction and check the glass trap or filter for food debris.
Disconnect disposer power before any work near it. Use the owner manual for filter removal.
WHAT YOU MAY NOTICE
Symptoms to record
- i20 appears on the appliance display.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Have the installer verify the disposer knockout and drain-hose height on a recent installation. Clear accessible restrictions safely.
What to noteWater has an unobstructed route out.
Use Cancel according to the model controls. Persistent i20 after cleaning and installation checks needs service.
What to noteThe dishwasher drains without repeating the alert.
THE DETAILS MATTER
Scope & troubleshooting notes
Installation height
The cited support page specifies a minimum drain-hose height of 32 inches; confirm the arrangement in your model installation guide.
YOUR NEXT DECISION
When to stop and get help
Arrange service if i20 persists or returns after the documented owner check.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Dishwasher Error Code i20 - Unit did not drain properly
Frigidaire · Manufacturer support · Checked
Code-specific explanation and owner troubleshooting — Frigidaire dishwasher families covered by the cited manufacturer support pages; confirm the complete model before applying guidance.