KitchenAid · Dishwashers
KitchenAid dishwasher F8E2: The fill-valve electrical circuit has an error
THE SHORT ANSWER
The fill-valve electrical circuit has an error.
KitchenAid identifies F8E2 with this condition: The fill-valve electrical circuit has an error.
Look for visible leakage around the inlet connection without opening electrical covers.
Never inspect wiring with power on. Keep away from electrical parts if water is present.
WHAT YOU MAY NOTICE
Symptoms to record
- F8E2 appears on the appliance display.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
The manufacturer calls for inspecting the inlet connection. Ask an installer to access the drip-tray area if needed.
What to noteNo active water leak is present.
With no active leak, disconnect power for 30 seconds and restore it. Request service if the code returns.
What to noteThe fill-valve circuit receives further diagnosis if necessary.
YOUR NEXT DECISION
When to stop and get help
Arrange service if F8E2 persists or returns after the documented owner check.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- F8E2- Dishwasher
KitchenAid · Manufacturer support · Checked
Code-specific explanation and owner troubleshooting — KitchenAid dishwasher families covered by the cited manufacturer support pages; confirm the complete model before applying guidance.