KitchenAid · Dishwashers
KitchenAid dishwasher FAE5: The dishwasher reports a diverter leak
THE SHORT ANSWER
The dishwasher reports a diverter leak.
KitchenAid identifies FAE5 with this condition: The dishwasher reports a diverter leak.
Look for leakage beneath the dishwasher and check accessible water connections.
Do not remove electrical covers or continue operating with an active leak.
WHAT YOU MAY NOTICE
Symptoms to record
- FAE5 appears on the appliance display.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Do not restart with an active leak or water near electrical components; have inaccessible connections inspected.
What to noteIt is safe to attempt the owner reset.
Press Cancel twice, then try a new cycle. If the error returns, schedule service.
What to noteThe code stays cleared or is referred for repair.
YOUR NEXT DECISION
When to stop and get help
Arrange service if FAE5 persists or returns after the documented owner check.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- FAE5 or F10E5 - Dishwasher
KitchenAid · Manufacturer support · Checked
Code-specific explanation and owner troubleshooting — KitchenAid dishwasher families covered by the cited manufacturer support pages; confirm the complete model before applying guidance.