ERROR CODEF12Diagnostic reference

Miele · Dishwashers

Miele dishwasher F12 / F13 / F15: water inlet blocked or restricted

THE SHORT ANSWER

Water inlet blocked or restricted

Miele gives F12, F13 and F15 the same owner checks for restricted water entry: faucet, inlet filter, hose and supply pressure.

First safe check

Check that the supply faucet is open and the visible inlet hose is not kinked.

Applies to

Miele dishwashers covered by the cited USA support page. Follow the exact model manual.

Codes covered by this guide
F12F13F15
Before you start

The inlet connection contains an electrical valve. Never immerse its housing; unplug and close the faucet before disconnecting it.

Go to safe checks

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 3 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

  1. Correct accessible kinks gently and watch the affected area for damage. Do not keep using a weakened or leaking hose.

    What to note

    The hose is unobstructed and dry.

  2. With power disconnected and water closed, follow the illustrated filter instructions. Rinse the removed filter, reinstall it with its seal correctly seated, reconnect and open water slowly.

    What to note

    The filter remains installed and the connection does not drip.

  3. Miele identifies flow pressure below 7.25 psi (0.5 bar) as a supply issue. A facility manager or plumber can assess it.

    What to note

    Persistent faults with adequate supply receive Miele service.

YOUR NEXT DECISION

When to stop and get help

Use Miele for a damaged hose or persistent fault; ask a plumber about inadequate supply pressure.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

Miele support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

  1. Fault F12 (water inlet)

    Miele USA · Manufacturer support · Checked

    Fault explanation and owner response — Miele dishwashers covered by the cited USA support page. Follow the exact model manual.

  2. Fault F13 (water inlet)

    Miele USA · Manufacturer support · Checked

    Fault explanation and owner response — Miele dishwashers covered by the cited USA support page. Follow the exact model manual.

  3. Fault F15 (water inlet)

    Miele USA · Manufacturer support · Checked

    Fault explanation and owner response — Miele dishwashers covered by the cited USA support page. Follow the exact model manual.

ErrHive is an independent information resource, not an authorized representative of Miele. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.