Miele · Dishwashers
Miele dishwasher F173: restricted water supply
THE SHORT ANSWER
Restricted water supply
Miele F173 concerns restricted incoming water, a dirty inlet filter or inadequate supply flow.
Check the supply faucet and whether other demand reduces water flow.
The inlet housing contains an electrical valve. Never immerse it; disconnect power and close the faucet before filter access.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Miele recommends prioritizing water intake where flow is inadequate. Have persistent supply problems assessed.
What to noteThe dishwasher receives an adequate supply.
Switch off, unplug and close the faucet. Follow the illustrated filter procedure; rinse the removed filter, then correctly reinstall both filter and seal before reconnecting.
What to noteFilter and seal are reinstalled.
Open the faucet slowly and check for dripping.
What to noteThe connection stays dry before operation resumes.
YOUR NEXT DECISION
When to stop and get help
Ask a plumber about low supply flow; contact Miele if F173 persists.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Fault F173
Miele USA · Manufacturer support · Checked
Fault explanation and owner response — Miele dishwashers covered by the cited USA support page. Follow the exact model manual.