Whirlpool · Dishwashers
Whirlpool Dishwasher F10E5: Diverter Leak
THE SHORT ANSWER
Whirlpool identifies a possible diverter leak.
F10E5: Whirlpool identifies a possible diverter leak.
Look for accessible evidence of water beneath the dishwasher.
Do not touch wet electrical connections or remove control, pump, or heater panels.
WHAT YOU MAY NOTICE
Symptoms to record
- The display reports F10E5.
UNDERSTAND THE POSSIBILITIES
Causes & useful observations
A code identifies a condition. It does not, by itself, confirm which part needs repair.
| Possible cause | What to look for | Safe check / next step |
|---|---|---|
| Diverter Leak | The FAE5 spelling is covered by the same manufacturer page. | Look for accessible evidence of water beneath the dishwasher. |
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Have leaking or inaccessible water connections corrected before a new wash.
What to noteActive leakage is addressed.
Whirlpool specifies pressing Cancel twice, then attempting a new cycle. Stop if the error or water returns.
What to noteA recurring error leads to service.
THE DETAILS MATTER
Scope & troubleshooting notes
Before choosing instructions
Match the appliance family and complete display to the source; an identical code on another appliance can mean something different.
YOUR NEXT DECISION
When to stop and get help
Request service if F10E5 remains or returns after the supported checks.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- FAE5 or F10E5 - Dishwasher
Whirlpool · Manufacturer support · Checked
Code meaning and Possible Solutions — Whirlpool dishwashers covered by the cited support article; meanings can differ on older platforms.