ERROR CODEF8E4

Whirlpool · Dishwashers

Whirlpool Dishwasher F8E4: Water in the Drip Tray

Documentation checkedBy ErrHiveUpdated October 28, 2026

THE SHORT ANSWER

The leak-protection/drip-tray area needs attention; recent installation and excess suds are relevant checks.

F8E4: The leak-protection/drip-tray area needs attention; recent installation and excess suds are relevant checks.

First safe check

Shut off the dishwasher water supply if safely accessible; do not enter a wet electrical area.

Applies to

Whirlpool dishwashers covered by the cited support article; meanings can differ on older platforms.

Before you start

For the installed-unit protective-drain sequence, keep power on and the door closed. Do not reach under a powered dishwasher.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

The display reports F8E4.

UNDERSTAND THE POSSIBILITIES

Causes & useful observations

A code identifies a condition. It does not, by itself, confirm which part needs repair.

Possible causes, observable symptoms, safe checks, and service boundaries
Possible cause	What to look for	Safe check / next step
Water in the Drip Tray	Clearing the display does not establish that a leak has been repaired.	Look for water outside the appliance and note whether it was just installed.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 2 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

Allow the protective drain sequence
After shutting off the water, press Cancel once to silence the alarm, keep the door closed, and leave power on as Whirlpool instructs.
What to note
Protective draining can continue.
Arrange an installation or leak check
Have the installer or technician inspect the tray, float connection, inlet fitting, and excess-suds evidence. Do not repeatedly empty the tray and restart.
What to note
The underlying leak or installation issue is corrected.

THE DETAILS MATTER

Scope & troubleshooting notes

Before choosing instructions

Match the appliance family and complete display to the source; an identical code on another appliance can mean something different.

YOUR NEXT DECISION

When to stop and get help

Arrange service for recurring tray water, inaccessible leakage, or an uncertain float connection.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

Whirlpool support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

F8E4 - Dishwasher
Whirlpool · Manufacturer support · Checked Oct 28, 2026
Code meaning and Possible Solutions — Whirlpool dishwashers covered by the cited support article; meanings can differ on older platforms.

ErrHive is an independent information resource, not an authorized representative of Whirlpool. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.