Electrolux · Washing machines
Electrolux washer E21: Water is leaving the washer too slowly
THE SHORT ANSWER
Water is leaving the washer too slowly.
Electrolux identifies E21 with this condition: Water is leaving the washer too slowly.
Look for a kink or restriction in the accessible drain hose.
Do not force a water-filled washer door or remove its pump cover.
WHAT YOU MAY NOTICE
Symptoms to record
- E21 appears on the appliance display.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Compare the drain connection with the model installation instructions, especially after installation or a move.
What to noteThe hose can drain without a restrictive bend.
If the external route is correct and E21 persists, arrange service.
What to noteThe drainage system receives further diagnosis.
YOUR NEXT DECISION
When to stop and get help
Arrange service if E21 persists or returns after the documented owner check.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Laundry front loading washer displaying Error Code E21 long pump out time.
Electrolux · Manufacturer support · Checked
Code-specific explanation and owner troubleshooting — Electrolux front-loading washers covered by the E21 US support page.