Electrolux · Washing machines
Electrolux washer E35: The pressure-sensing system indicates overfilling
THE SHORT ANSWER
The pressure-sensing system indicates overfilling.
Electrolux identifies E35 with this condition: The pressure-sensing system indicates overfilling.
Check whether water is still entering or leaking before attempting any reset.
Do not restart an actively overflowing washer or approach wet electrical components.
WHAT YOU MAY NOTICE
Symptoms to record
- E35 appears on the appliance display.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Stop normal use; isolate the water supply if safely accessible and request help for continuing inflow or leakage.
What to noteThe immediate water problem is controlled.
The support page permits Cancel followed by Start. If E35 returns, arrange installation or service assessment.
What to noteThe pressure/level condition is checked without repeated restarting.
YOUR NEXT DECISION
When to stop and get help
Request service for continuing water entry, leakage or a recurring E35.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Laundry front loading washer displaying Error Code E35 pressure sensor indicates water overfill.
Electrolux · Manufacturer support · Checked
Code-specific explanation and owner troubleshooting — Electrolux front-loading washers covered by the E35 US support page.