Miele · Washing machines
Miele washer F11 code: restricted drainage
THE SHORT ANSWER
Restricted drainage
Miele F11 means drainage is restricted. Begin with the external drain-hose route.
Look for a kink and check the drain-hose height against the installation instructions.
Hot water can scald. Never force a locked door or fully remove a filter while water flows.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Miele specifies a maximum delivery head of 3 feet 3 inches (1 meter). Correct visible kinks without straining the hose.
What to noteThe route matches the installation instructions.
Switch off and let hot water cool. Follow the model instructions: catch water in a container, loosen the filter slowly, and retighten to control flow. Remove it fully only after flow stops; clean and refit securely.
What to noteThe refitted filter does not leak.
Contact Miele if F11 remains after these checks.
What to noteTell service whether water remains.
YOUR NEXT DECISION
When to stop and get help
Contact Miele if the fault persists. Stop for leakage, burning smells or repeated breaker trips.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Washer fault F11
Miele USA · Manufacturer support · Checked
Fault meaning and recommended response — Miele washing machines and washer-dryers covered by the cited Miele USA fault guidance. Confirm the exact model before following model-dependent instructions.