Miele · Washing machines
Miele washer F16 code: excess detergent or foam
THE SHORT ANSWER
Excess detergent or foam
Miele associates F16 with too much detergent or detergent additive, or a wash program unsuitable for the load.
Check the detergent and stain-remover quantities used for this load.
Keep the cabinet closed. Never bypass the lock. Avoid electrical connections if water or damage makes access unsafe.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Reduce excess additives and follow the detergent maker’s dose for water hardness and soiling.
What to noteYou can identify how much detergent was added.
Choose the program appropriate to the fabrics and follow the washer instructions. Contact Miele if F16 continues with correct dosing.
What to noteThe next correctly dosed load does not repeat the warning.
THE DETAILS MATTER
Scope & troubleshooting notes
Code context
More product is not a reliable answer to a poor result when the washer is already detecting excessive foam. F16 alone does not prove a drain-pump failure.
YOUR NEXT DECISION
When to stop and get help
Contact Miele if the fault persists. Stop for leakage, burning smells or repeated breaker trips.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Washer fault F16
Miele USA · Manufacturer support · Checked
Fault meaning and recommended response — Miele washing machines and washer-dryers covered by the cited Miele USA fault guidance. Confirm the exact model before following model-dependent instructions.