Miele · Washing machines
Miele washer F19 code: flow-meter fault
THE SHORT ANSWER
Flow-meter fault
Miele identifies F19 as a stiff flow meter and directs the owner to service. The message is different from an inlet-water check that can be resolved simply by opening the faucet.
Photograph F19 and record the complete model number for Miele service.
Keep the cabinet closed. Never bypass the lock. Avoid electrical connections if water or damage makes access unsafe.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Give Miele the code, model and cycle stage. The manufacturer assigns this fault to a technician.
What to noteService receives the exact fault without a guessed replacement part.
THE DETAILS MATTER
Scope & troubleshooting notes
Code context
Describe F19 as a flow-meter fault when booking service. The public support page does not specify a failed part number or instruct the owner to open the inlet assembly.
YOUR NEXT DECISION
When to stop and get help
Arrange Miele service; repeated restarting is not a documented repair.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Washer fault F19
Miele USA · Manufacturer support · Checked
Fault meaning and recommended response — Miele washing machines and washer-dryers covered by the cited Miele USA fault guidance. Confirm the exact model before following model-dependent instructions.