Miele · Washing machines
Miele washer F62 code: program selector between valid positions
THE SHORT ANSWER
Program selector between valid positions
Miele washer F62 can appear when the program selector sits between two defined settings.
Check that the selector points directly to a valid program position.
Keep the cabinet closed. Never bypass the lock. Avoid electrical connections if water or damage makes access unsafe.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Turn the program selector to a marked, defined position rather than leaving it between settings.
What to noteThe display recognizes the selected program.
If F62 remains with the selector correctly positioned, request Miele service.
What to noteRecord which setting was selected.
THE DETAILS MATTER
Scope & troubleshooting notes
Code context
A selector-position check does not require opening the control panel. Persistent F62 needs assessment rather than forcing the knob.
YOUR NEXT DECISION
When to stop and get help
Contact Miele if the fault persists. Stop for leakage, burning smells or repeated breaker trips.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Washer fault F62
Miele USA · Manufacturer support · Checked
Fault meaning and recommended response — Miele washing machines and washer-dryers covered by the cited Miele USA fault guidance. Confirm the exact model before following model-dependent instructions.