Frigidaire · Washing machines
Frigidaire washer E1: The top-load washer is filling too slowly or not receiving water
THE SHORT ANSWER
The top-load washer is filling too slowly or not receiving water.
Frigidaire identifies E1 with this condition: The top-load washer is filling too slowly or not receiving water.
Close the lid and confirm both household water faucets are fully open.
Shut both water valves before disconnecting any inlet hose. Stop for visible tub leakage.
WHAT YOU MAY NOTICE
Symptoms to record
- E1 appears on the appliance display.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Straighten visible hose kinks and check whether the household supply is working normally.
What to noteWater can reach both inlets.
If inlet screens need cleaning, follow the model instructions with water shut off. Have leaks or continuing slow fill assessed.
What to noteE1 clears once the filling problem is corrected.
YOUR NEXT DECISION
When to stop and get help
Arrange service if E1 persists or returns after the documented owner check.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Top Loading Washer - displaying Error Code E1 long fill time
Frigidaire · Manufacturer support · Checked
Code-specific explanation and owner troubleshooting — Frigidaire top-loading washers covered by the E1 support article.