Frigidaire · Washing machines
Frigidaire washer E3: The top-load washer lid is open or its lock has not engaged
THE SHORT ANSWER
The top-load washer lid is open or its lock has not engaged.
Frigidaire identifies E3 with this condition: The top-load washer lid is open or its lock has not engaged.
Close the lid completely and check that the washer sits level.
Never bypass the lid lock or reach into a moving basket.
WHAT YOU MAY NOTICE
Symptoms to record
- E3 appears on the appliance display.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Remove anything preventing the lid from closing normally. Do not force it.
What to noteThe lid can close fully.
If it does not lock when the cycle starts, stop and request service.
What to noteThe lid-lock or control circuit is assessed professionally.
YOUR NEXT DECISION
When to stop and get help
Arrange service if E3 persists or returns after the documented owner check.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Laundry top loading washer displaying Error Code E3 washer lid open or lid lock failed.
Frigidaire · Manufacturer support · Checked
Code-specific explanation and owner troubleshooting — Frigidaire top-loading washers covered by the E3 support article.