Frigidaire · Washing machines
Frigidaire washer E2: The top-load washer is taking too long to drain
THE SHORT ANSWER
The top-load washer is taking too long to drain.
Frigidaire identifies E2 with this condition: The top-load washer is taking too long to drain.
Check for a kink in the accessible drain hose and confirm the lid is closed.
Do not force the lid or open a pump with water inside the machine.
WHAT YOU MAY NOTICE
Symptoms to record
- E2 appears on the appliance display.
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Review standpipe height against the model instructions; ask the installer to correct a recent installation.
What to noteThe hose is routed at the required height.
With the lid closed, press Start/Pause. Persistent drainage failure needs service.
What to noteThe machine drains and can proceed to spin.
YOUR NEXT DECISION
When to stop and get help
Arrange service if E2 persists or returns after the documented owner check.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- Laundry top loading washer displaying Error Code E2 water takes too long to drain.
Frigidaire · Manufacturer support · Checked
Code-specific explanation and owner troubleshooting — Frigidaire top-loading washers covered by the E2 support article.