Frigidaire washer E4: The top-load washer detects an unbalanced load during spin

Documentation checkedBy ErrHiveUpdated October 28, 2026

THE SHORT ANSWER

The top-load washer detects an unbalanced load during spin.

Frigidaire identifies E4 with this condition: The top-load washer detects an unbalanced load during spin.

First safe check

Allow the basket to stop, then redistribute clothing that has gathered on one side.

Applies to

Frigidaire top-loading washers covered by the E4 support article.

Before you start

Wait for all movement to stop. Do not move or tip a loaded washer.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

E4 appears on the appliance display.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 2 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

Rebalance the load
Spread items around the basket after the washer permits the lid to open.
What to note
The load is more evenly distributed.
Check the installation
Verify firm floor support and correct leveling; a recent installation may still have shipping foam that the installer must remove.
What to note
Repeated imbalance is assessed after load and installation checks.

THE DETAILS MATTER

Scope & troubleshooting notes

Automatic recovery

The washer may make several balancing attempts before requiring you to redistribute the load.

YOUR NEXT DECISION

When to stop and get help

Arrange service if E4 persists or returns after the documented owner check.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

Frigidaire support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

Laundry top loading washer displaying Error Code E4 washer is out of balance.
Frigidaire · Manufacturer support · Checked Oct 28, 2026
Code-specific explanation and owner troubleshooting — Frigidaire top-loading washers covered by the E4 support article.

ErrHive is an independent information resource, not an authorized representative of Frigidaire. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.